FDR Rheometer

FDR (Flat Die Rheometer) is a testing machine that measures torque that changes as rubber is vulcanized when sinusoidal torsional vibration is applied by induced blended rubber between the upper and lower dies of a flat plate at a specified temperature, and requires vulcanization changes from changes in maximum torque, minimum torque, scorch time, vulcanization time, visco, etc., and uses a cone drive to accurate sine wave vibration and the of a 4heater drive, which has excellent accuracy and reproducibility of test results It It has been discussed.

Furious, it is a vulnerable vulcanization tester that has been considered into a compact shape designed of the installation location due to a complicated layout design of each component.

Furmentation, foam pressure measurement and program heating experiments that can analyze the foaming pressure of foam rubber and the foaming reaction and vulcanization REACTION HAVE ALSO BEEN PREPARED AS OPTIONS.

• Reference standard: JIS K 6300-2/ISO6502
• Overload function: 22 N·m or more
• Test temperature: 50 to 230 ℃
• Dimensions: 333 (W) x 520 (D) x 780 (H) mm

‍

The flat dirheometer (FDR) is designed to analyze the behavior of rubber during the vulcanization process in detail, and measured measures changes in maximum torque, minimum torque, scorch Time, vulcanization time, and viscovariance. This makes it possible to clearly grasp vulcanization techniques, which are essential for product quality control. By improving a cone drive and 4heater drive, the reproducibility and accuracy of test results have been improved.

The flat dirheometer (FDR) is a testing machine performed to strictly monitor the vulcanization process of rubber products, and performed in vibratory torque measurement. THIS DEVICE MEASURES TORQUE DURING VULCANIZATION IN REAL TIME BY INFECTIVE COMPOUND RUBBER BETWEEN HEATING DIES COMPOSITION ONE ABOVE THE OTHER AND DURING SINUSOIDAL TORSIAL vibrations. This quantifies maximum torque, minimum torque, scorch time, and vulcanization time, which are important rubber measurements, and also evaluates dynamic changes in viscosities. Users can acquire extremely high accuracy data using cone drive and 4heater drive technology.

THE TEST TEMPERATURE CAN BE SET IN A WIDE RANGE FROM 50℃ TO 230℃, AND THE INSTALLATION SPACE REQUIRED BY THE EQUIPMENT CAN ALSO BE STORED COMPACTLY, MAKING IT SUITABLE FOR FACTORY environments under any conditions. Also, with optional functions, it is possible to measure the foaming pressure of foam rubber and mutual analysis of the foaming reaction and vulcanization reaction.

This device meets test standards in testing with JIS K 6300-2 and ISO6502, and is equipped with an overload function of 22 N·m or more. The dimensions are 333 mm (width) x 520 mm (depth) x 780 mm (height), and the design makes ease of handling while being highly robust.

‍

‍

‍